What is meant by retrofit?
Making your home more energy efficient starts with the fabric of your home
Many modern homes are built with energy efficiency in mind, but the same can’t be said for older properties. In fact, the Federation of Master Builders reports that three out of five homes in the UK have a low energy efficiency rating. For millions of households, that means higher heating bills and draughty rooms or paying more for less comfort.
What Do We Mean by Retrofit?
Retrofitting is about upgrading your home so that it performs more like a modern house, keeping the warmth in when you need it, staying cool when it’s hot outside and costing less to run all year round. “I don’t like the term retrofit,” says Nik Nelberg, managing director of Lonon-based Earl and Calam Design and Build. “Not many people know what it means. I prefer to talk about making houses more energy efficient.”
Retrofit might sound like industry jargon, but the idea is straightforward. The Federation of Master Builders (FMB) explains it clearly: “Retrofit is the practice of bringing older homes up to modern standards of thermal efficiency.” Rather than upgrading with heat pumps or solar panels, retrofit takes what is known as a “fabric first” approach. That means focusing first on the very structure of the building: the walls, roof, floors, windows and doors. The goal is to get the basics right. When you have achieved that, everything else works better. Your home will need less heating.

Image supplied by Earl and Calam Design and Build, fitting external cladding to older property without cavity walls
Which houses need retrofitting?
In the UK, most homes built after 2012 have an average energy efficiency rating equivalent to C or above. If your home was built before then it’s likely it could benefit from some retrofit work to reduce energy use and bills. By thinking fabric first, you can prevent valuable heat from escaping.
“Warm air can escape from your home in all directions, including the roof, walls, floor, window and doors - meaning lots of energy you pay for can go to waste. The first step is to understand where your home may be losing heat. This will help you decide on the measures which will have the most impact,” advises Power to Switch, an energy comparison site. “About 25% of the heat produced by a boiler will escape through the roof of your home. About 35% of the heat will escape through the walls and gaps in and around windows and doors and about 10% of heat will disappear through the floor,” it adds.
Start with a retrofit assessment
Rather than just rolling out loft insulation or comparing quotes for new windows, start with a retrofit assessment costing a few hundred pounds. This is a professional survey that gives you a clear plan of action. Instead of guessing which improvement to make, an assessor will identify where your home is losing the most heat, suggest the measures that will make the biggest difference and put them in order of priority. They will also provide a rough idea of costs, so you can plan ahead.
It’s important to understand how this differs from an Energy Performance Certificate (EPC). An EPC gives your property a standardised rating from A to G, which is useful when buying or selling, but it does not provide detailed solutions. A retrofit assessment, on the other hand, digs much deeper. It follows PAS 2035, a set of government-backed guidelines that outline how retrofit projects should be carried out to a high standard, including installation. While compliance is only compulsory for government-funded projects, it is still a valuable benchmark for privately funded work, helping you avoid poor workmanship or “cowboy” builders.
Making your home more energy efficient.
It’s possible to make quick and inexpensive improvements, such as adding draughtproofing to windows and doors, but the real gains come from making changes to the fabric of your house. Retrofit specialist Nelberg, whose firm is a member of the FMB, says: “I suppose the biggest wins are roof and wall insulation because that is where the most heat escapes from. But it depends on the type of house. If an older property has single glazed windows, upgrading to double-glazing is a no-brainer.”
Possible retrofit measures might include:-
Loft and roof insulation:
Up to a quarter of your home’s heat can escape through the roof. Make sure insulation is at least 270mm thick and covers the entire loft space. If your loft is a living area, consider “warm roof” insulation, which requires professional installation. Common options include mineral or glass wool batts, polystyrene (sometimes foil-covered) slats. Natural options like sheep’s wool or hemp can be used as breathable alternatives.
Wall insulation
Around a third of heat is lost through the walls. Cavity walls can be filled with insulation. Solid walls (common in older properties) can be insulated either from the inside or outside. Though more expensive, this has a big impact on comfort and bills.
Floors
Insulating under ground floor floorboards prevents heat loss and cold drafts, especially over basements. Sealing gaps between floorboards also helps.
Cold bridging fixing
Cold spots occur where heat escapes through structural elements like beams or window frames. Introducing a “thermal break” or using specialist insulating materials can help avoid this.
Upgrade windows and doors
Old single-glazed windows and poorly fitted doors are common culprits for heat loss. Replacing with double or triple glazing, along with insulated frame, reduces draughts and helps rooms feel instantly warmer.
Ventilation upgrades
Airtight homes need good ventilation to avoid damp and mould. Options range from simple trickle vents to mechanical ventilation with heat recovery (MVHR), which recycles warmth from outgoing air.
When you’ve improved the fabric of your home, you’ll be in a better position to add a low carbon heating system like a heat pump (if you have any money left. It will far more effective and cheaper to run in a well-insulated, airtight home.
Taking a whole house approach
When you insulate a house and make it airtight but don’t think about how to ventilate it properly, damp and mould can occur, warns the FMB. That’s why it’s important to take a ‘whole house’ approach when retrofitting. You don’t need to tackle everything at once but each change you make affects the rest of the property. Getting expert advice means the work will keep your home warmer without creating problems like mound.
Seal up a house without proper airflow and you could end up with damp, mould and even structural problems. In older homes such as Victorian terraces, which were designed to “breathe” through natural draughts, the risks are even higher if the work isn’t done correctly.
As retrofit specialist Nelberg explains: “Insulation and airtightness are the best energy efficiency measures, but people must consider ventilation properly. We often put in mechanical ventilation and heat recovery (MVHR) unit in houses we insulate and make airtight.”
An MHVR system keeps fresh, filtered air flowing while recycling warmth from air that leaves your home. This means less need for heating and no more choosing between stuffy rooms or losing heat through open windows.
Avoiding common pitfalls
The way insulation is installed makes a huge difference. “Insulation without understanding moisture is almost dangerous and quite tricky,” says Nelberg, who trained on a PAS 2035 pilot course. Blocking up air pathways without thinking about ventilation can trap moisture, leading to rot, mould and expensive repairs. This is especially true in older homes. “Victorian properties are often draughty with gaps around the windows and floors. They are very expensive to heat and wasteful. Now we are sealing up our houses but that can cause problems.
As the FMB warns: “In theory, anyone can quote to insulate your floor, but they may not have the relevant training or experience to identify other issues under the floorboards like cold bridging, for example, where a cold and warm surface meet, causing condensation.”
Choosing the cheapest quote without checking experience or qualifications can backfire badly, turning energy-saving measures into long-term problems. For this reason, it is always worth working with contractors who understand retrofit standards and follow best practice guidance like PAS 2035.
Start with a retrofit assessment, work with trusted professionals, take a whole house, fabric first approach and make sure ventilation is part of the package. Done right, retrofit should lead to a warmer home, lower bills and a smaller carbon footprint.
