Energy saving upgrades for winter

Beat the bills and make the colder months more comfortable

Whether you are staying or selling, it pays to make your home more energy efficient. Not only can you save on utility bills, but you could also boost the value of your home. With winter approaching and energy costs remaining stubbornly high, now is the time to make your home energy efficient. By doing so you’ll not only be helping your wallet, but also the planet - an estimated 26 per cent of the UK’s CO2 emissions come from household energy use, government figures suggest.

A smart meter displaying the cost of energy used that day

Draught proofing – an easy first step

Britain’s homes are among the oldest and draughtiest in Europe. In older properties, up to one third of the heat can be lost due to poor insulation and draughts, which is like throwing away £1 for every £3 spent on heating. Simple DIY draught proofing is an effective way to prevent heat loss yet is often overlooked.

A spokesman for the Energy Savings Trust explains: “Draughts allow warm air to escape and cold air to enter, making your heating system work harder. Installing inexpensive draught-proofing strips on windows and doors is a quick and easy DIY task that could save you around £35 annually on energy bills. To find draughts, run your hand around windows, doors and skirting boards. If you feel cool air, you likely have a draught that can be sealed with caulk, brushes, strips or other DIY materials. But be careful not to block ventilation, including air bricks or trickle vents, especially high moisture areas, such as kitchens, bathrooms or damp rooms.”

Chimneys are another common source of heat loss. Having an open chimney has been compared to leaving a window open all year round. Chimney draught excluders can save an estimated £50 a year, according to the Energy Saving Trust.  Chimney Sweep is a breathable, natural wool product that will stop cold draughts when the chimney is not in use while maintaining ventilation. It’s available in round, square and oblong formats and in different sizes. Prices start at £18.

Suspended timber floors are another common culprit. It’s easy to seal gaps between floorboards. Low-cost options include V-shaped StopGap strips or squidgy DraughtEx rolls. Rugs, good underlay beneath carpets, laminate or vinyl flooring also help. Alternatively, if you are doing a major revamp, consider installing breathable insulation below the floorboards.

Upgrade heating controls

Fitting thermostatic radiator valves (TRVs) is an effective way to manage the temperature in individual rooms, helping you save energy by only heating spaces as need. At less than £10 per valve, TRVs are a cost-effective option and while installation can be a DIY job, it’s tricky. Issues like leaks or airlocks can arise, so it’s best to leave the installation to a qualified Gas Safe or Corgi registered plumber.

When installed, TRVs work by automatically controlling the flow of how water from the boiler into the radiator based on the room’s temperature. Unlike manual values which work like a tap to shut off or allow hot water flow, TRVs self-regulate, preventing rooms from overheating and reducing energy waste. Avoid putting furniture or long curtains in front of TVRs as this stops them accurately reading the room temperature.

For even greater control, consider installing smart heating controls that learn your behaviour and automatically adjust the heating to meet your needs. While wireless systems like Wiser two zone starter kit (£289) paired with TRVs at £56 each can deliver savings, it will take longer to pay for their upfront cost as they are more expensive. Other popular smart heating controls include Hive and Nest.

Banishing limescale for better efficiency

Around 60 per cent of UK homes have hard water which leads to limescale build-up in appliances. Limescale acts as an insulator. The downsides of limescale build-up aren’t just kettles taking longer to boil, it can also reduce the efficiency of your boiler. Just 0.8mm of limescale can reduce heat transfer by as much as 10%, meaning your boiler must work harder to maintain the heat level set on your thermostat – and your energy bills climb higher.

A simple device like Hydroflow, recommended by British Gas, can help. This clever device is fitted to your plumbing system and sends a frequency signal through your pipes. This prevents limescale sticking to surfaces and even breaks down existing  deposits.  It’s designed to protect your hot water system as well as extend the life of appliances like dishwashers and washing machines. The Hydroflow Water Conditioner costs about £122 - £180. (prices correct October 2024).

Insulate the loft for big savings

Loft insulation is one of the most cost-effective energy saving measures. According to the Energy Saving Trust, properly installed loft insulation can save a semi-detached house up to £250 a year and a detached house £340. If your home currently lacks adequate insulation, this should be a priority. Check if you qualify for free insulation under the Great British Insulation Scheme. This government initiative provides free insulation for the least energy efficient homes with an EPC of D to G and in the lower council tax bands (A to D in England or A to E in Scotland and Wales). You can only get one type of insulation for your home under this scheme – cavity wall, solid wall, under floor or loft.

Alternatively, if someone in your household receives certain government benefits, you may qualify for free insulation under the Energy Company Obligation (ECO) scheme.

Be aware if your loft suffers from dampness, installing insulation can make this worse. So, fix any damp issues with the help of a professional first. Always ensure the insulation doesn’t block any vents, grills or air bricks as that could lead to mould and rot. For those looking to use their lofts for storage, professional installation is often better than DIY. Aim to add 270mm of mineral wool or 240mm of sheep’s wool or another insulator,  leaving a 50mm air gap for ventilation between the insulation and floorboards.

Energy audit: know your home’s efficiency

If you’re planning to sell or rent your home, you’ll need an Energy Performance Certificate. (EPC). The EPC rates a home’s energy efficiency from A to G, with A being the most efficient.o  Homes with a higher rating typically enjoy lower energy bills and a reduced carbon footprint.  In England and Wales, about 11.5 million properties fall below the recommended C grade. This means more spending on fuel and pumping more carbon into the atmosphere than necessary.

The Government’s goal is for all rented properties to achieve a minimum EPC rating of C by 2030, helping to tackle fuel poverty and reduce carbon emissions.  This will help to improve living conditions for tenants, though landlords may worry about the cost of upgrading. Higher EPC rating boost house prices, according to research by Nationwide. The building society found an F or G rated home is valued at 4 per cent less than a similar D rated property.

EPCs are valid for 10 years, or until work such as loft insulation, improves the house’s performance. To find your current EPC, visit the official register epcregister.com or vidit our "Find Professionals" page to find an energy assessor to issue you with a new one.

By making a few simple upgrades, you’ll be able to enjoy a warmer, more comfortable home this winter while cutting your energy bills and reducing your carbon footprint.